On Fri, 12 Mar 2004, Wayne Barber wrote:
If you have TCM, try using the System Monitor function. First on the NMC, using the Status Group. One of those shows temperature in celsius.
From the NMC:
HubStatus Red: Chassis Fan failure(3) Chassis Temp: 31C
Then you can highlight the T1 lights on the DSP cards and use System Monitor to see that status of the channels.
The one I'm sure it is griping about on all 5 PRIs is the last channel (24). It currently says DS0 is Span line D-channel(23) Thanks for the pointer to the Session Monitor. Any suggestions on chasing down these Fan failures on 2 NMC cards and fixing the error on the last channel? Gerald
On 9 Mar 2004 at 15:17, Gerald wrote:
CHASSIS - X.X.X.2 Environmental Stats out of Range DSP - DSP card on chassis X.X.X.2 has 1 unavailable lines DSP - DSP card on chassis X.X.X.2 has 2 unavailable lines DSP - DSP card on chassis X.X.X.2 has 3 unavailable lines CHASSIS - X.X.X.4 Environmental Stats out of Range DSP - DSP card on chassis X.X.X.4 has 1 unavailable lines DSP - DSP card on chassis X.X.X.4 has 2 unavailable lines