Hi All, TCH - quad, digital and analog card w/ Netserver and MMC In the TCM GUI -> Configure -> Action/Command Select "Hardware" and "Hardware Reset" for Command to Excute. Question: If I do "Execute" from the above, will that action delete all the existing Netserver card's setup information. ? My intention is to be able to Remote Reboot the TCH thru the TCM GUI, but not reset the TCH to its manufacture default state. Thanks in adv for any help that you may post here. Sincerely yours Meng tsaim@mft.com - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.