|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of ROC Services |Sent: Tuesday, November 30, 1999 2:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) HiPer Arc improvement thoughts followup :) | | |On Thu, 16 Sep 1999, Mike Andrews wrote: | |[snip] | |> Multilink PPP got real slow in the last DSP releases and needs |work again. | |This seems to still be a problem. | |HDSP 2.0.81 / HARC 4.2.32-1 | |We've got a customer who uses 4 channels of ISDN. We just moved them from |a Livingston PM2 which is dying rapidly to our TC box on PRI. Since the |move, throughput is way down, and I did a 'mon ppp' to see if I could see |any reason why. | |On the 'mon ppp', we get a pretty even distribution among the user's four |channels on inbound traffic. However, all outbound traffic seems to go |out the same channel. Could this perhaps explain something, or does 'mon |ppp' display outbound multilink packets incorrectly? A assume that by inbound you mean traffic from the user? MON PPP should show the correct ports for the traffic. To verify this, monitor the interfaces by name and not by username. Or use the TAP feature. You should see two-way data on all 4 interfaces. |Remote router is a Cisco 3620 running IOS 11.2(11), which until earlier |this week was performing much better connected to the PM2. | |Any input would be appreciated, and I'll be happy to work with anyone who |wants to look into this, test code, etc. For this you need to open a ticket with support. -M - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.