Yeah, that's what I thought. I was hoping for something that would keep my customers a little happier. Any ideas? Or any other responses to my original problem of not being able to do soft busy outs? Thanks das Greg Coffey (greg@coffey.com) spake:
It boots them all off very quickly.
At 09:19 AM 1/18/00 +0900, you wrote:
Hi Christopher,
Thanks for the response. When you do a hard busy on the span, does that immediately disconnect all of the users currently connected to that card, or is it friendlier? Thanks
das
Christopher Berry (berryc@rof.net) spake:
When I need to busy out a time span on a T1, I do a hard busy as I was told that the CO can override a soft busy. Since I do not want any traffic to come in while flashing, I'm told, I always do this.
Hope this helps.
Christopher Berry rof.net Web Design and Technical Support (970) 945-4920 x17
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center #100, Casper, WY 82601 www.vcn.com
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.