Also....if you can highlight the span via tcm and if I remember correctly goto configure...programmed settings...span settings and copy/paste what you have setup for your span settings. Todd ----- Original Message ----- From: "Todd Bertolozzi" <todd.bertolozzi@voyager.net> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Wednesday, January 21, 2004 4:30 PM Subject: Re: [USR-TC] Timeslot Unavailable
what do you see when you do a "list chassis"?
Todd ----- Original Message ----- From: "Dev" <dev@umpa-us.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 21, 2004 3:38 PM Subject: [USR-TC] Timeslot Unavailable
This List ROCKS!
Okay I now have access to the correct modems on the t1 card! Now i am trying to dial out and i get a no carrier error (carrier light is on) I do an ATI6 and see: Failed to Connect Reason is Timeslot Unavailable
When i was on the phone with my Telco they are not getting a wink when they tried dialing my number?
I am thinking this is all associated.
I do have the TCM and have it set for wink but no go.
I am not able to plug in via the consol port (no cable )
Any Clues and suggestions?
Thank you to everyone who has helped and will help in the future!!!
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc