Eureka! It's not the NMC code - it's TCM 7.0.7! Try looking at a chassis with 6.0.23 and you will see that all 24 DS0 channels are available on CT1 trunks and 23 Timeslots when PRI trunks are there no no matter the NMC code version. Man I hate 3com code revs ... in addition, I followed the "upgrade" instructions for an ARC running 4.1.59-6 to 5.0.9 (using the 4.1.13 code inbetween) and it looked good - for about 5 minutes on 5.0.9 then it stopped responding to pings and other IP traffic. It has a whopping total of 2 DSP spans on this test chassis! Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com ----- Original Message ----- From: "Terry Kennedy" <terry@olypen.com> To: <usr-tc@lists.xmission.com> Sent: Thursday, October 12, 2000 5:48 PM Subject: RE: (usr-tc) NMC Code v7.1.8 problem
I have noticed the same thing. Try busying out the modems and it will only busy out 23. Sucks!
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Marshall Morgan Sent: Wednesday, October 11, 2000 3:25 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) NMC Code v7.1.8 problem
Using CT1 trunks for years on a 16M/486 based NMC. Upgraded from 6.x to 7.1.8 and now the NMC thinks the number of channels on the DSP is 23 (instead of 24). WTF? Anyone know a fix for this? Rebooted the NMC and DSP (v2.1.9)'s and it's still that way.
Marshall Morgan
Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com
601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.