----- Original Message ----- From: "Jeff Lynch" <jeff@mercury.jorsm.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, June 13, 2000 7:27 PM Subject: Re: (usr-tc) NETServer 16I/MLPPP/NAT
On Tue, 13 Jun 2000, Ved wrote:
Is it possible to use the NETServer 16I as a Multilinking NAT router? We don't use the thing anymore but it might be useful for a customer of ours. We want to bind 4 BRI's to get 256K and also do Network Address Translation for their network. It's running some old version of ComOS.
Multilink yes - Netserver 16I can do multilink - but it cannot do NAT.
When receiving the call, yes, but for the record, we found the place in the docs that states it (NS16I with ComOS 3.xsomething) won't do MLPPP when originating the call (like in LAN-to-LAN routing) which is the manner in which we hoped to use it.
Dialout MLPPP was never supported in NETServer products. Both the NETServer and the 8/16 had issues with dialout multilink. there are ways to go around it and get a MLPPP call working but the docs always said that dialout mlppp - no support. V
--jeff
============================================================================
Jeffrey A. Lynch | JORSM Internet, Regional Internet Services email: jeff@jorsm.com | 7 Area Codes in Chicagoland and NW Indiana Voice: (219)322-2180 | 100Mbps+ Connectivity, 56K-DS3, V.90, ISDN Autoresponse: info@jorsm.com | Quality Service, Affordable Prices http://www.jorsm.com | Serving Gov, Biz, Residential Since 1995
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.