Message

The reason you are getting busies once your first DSP is full is because the hiper arc doesn’t see your other 2 cards as shown with the ‘list chassis’ command.

Not sure why NMC awareness isn’t picking those up as you do have it enabled. Might try disabling it (disable nmc chassis_awareness) and then reenabling it. You also might have to reboot the NMC / ARC / DSP’s. If that doesn’t work for you, you can manually setup the DSP’s.

First disable chassis awareness. Then do something similar to the following: set chassis slot 2,3 card_type hdm_30

Todd

-----Original Message-----
From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi
Sent: Tuesday, August 02, 2005 3:27 AM
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: Re: [USR-TC] Hiper DSP

Sorry for mistake in sendind wrong attached file in my previous email.

HiPer>>
HiPer>> SHOW NMC SETTINGS

NMC SETTINGS
Chassis Awareness:        ENABLED
Dynamic Slot Assignment: DISABLED
DSA Idle Rebalancing:     ENABLED
SNMP Forwarding:          ENABLED
HiPer>>

-------------------------------------------------------------------------------------------------------------

HiPer>> list chasSIS
Slot    Owner        Description                      Ports   Type    Console
1       YES          30 Channel High Density Modem    30          DYNAMIC YES
2       YES          --EMPTY--                        0           STATIC NO
3       YES          --EMPTY--                        0           STATIC NO
4       YES          --EMPTY--                        0           STATIC NO
5       YES          --EMPTY--                        0           STATIC NO
6       YES          --EMPTY--                        0           STATIC NO
7       YES          --EMPTY--                        0           STATIC NO
8       YES          --EMPTY--                        0           STATIC NO
9       YES          --EMPTY--                        0           STATIC NO
10      YES          --EMPTY--                        0           STATIC NO
11      YES          --EMPTY--                        0           STATIC NO
12      YES          --EMPTY--                        0           STATIC NO
13      YES          --EMPTY--                        0           STATIC NO
14      YES          --EMPTY--                        0           STATIC NO
15      YES          --EMPTY--                        0           STATIC NO
16      YES          HiPer Access Router NAC          0           DYNAMIC NO
HiPer>>