Turn on dip switch 5 and try console again. Ahamed Bauani wrote:
Hello All
I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing :
Booting*...*
Loading Kernel....OK
Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol.
My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default?
Or any other suggation... really in a bad position. please help.
Thanks in advance;
Ahamed Bauani.
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc