Need more information here...
Is this a new card you've installed ? what is it?
things to check
1 / have you set your modem density on the netserver for this card ?
2 / have you set the 'limit' command for max connections ?
3 / have you then activated modems after configuring them ?
Steve Monkhouse
Network Engineer
--------------------------------
EtherTech Computer Services
Ph : +61-3-9768-2665
Fx : +61-3-9768-2664
http://www.ethertech.com.au
--------------------------------
-----Original Message-----
From: usr-tc-admin@mailman.xmission.com
[mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Tom Harberts
Sent: Friday, April 12, 2002 11:19 AM
To: usr-tc@mailman.xmission.com
Subject: [USR-TC] Help on Interface Please
How do I get the "Interface:" changed from "Unassigned" to
"ptp29" and set the default MTU to 1500? like the previous
24 ports are?
-Tom
On the NetserverPRI is type SHOW S29 and I get...
----------------------- Current Status - Port S29 ---------------------------
Status: IDLE
Input: 0 Parity Errors: 0
Output: 0 Framing Errors: 0
Pending: 0 Overrun Errors: 0
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial In) (Security)
Login Service: PortMux PortMux
Device Service: Telnet@6029 Telnet@6029
Modem Stat: READY ACTIVE
Databits: 8 8
Stopbits: 1 1
Parity: none none
Flow Control: None None*
Modem Control: on on
HDLC Framing: PPP in modem PPP in modem
SLIP Framing: SLIP in NETServer SLIP in NETServer
Remote Host: 0.0.0.0 0.0.0.0
Interface: Unassigned (SLIP,Listen (SLIP,Quiet)
Mtu: 0 0
_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc