I'm trying to hook up a Pipe 75 with a Static IP and NAT enabled to a HiPerARC chassis.. When I disable the NAT on the Pipe, it connects, when I enable it, it won't connect.. The pipe has been dialing into a Livingston PM2e up until now, and when I modify the remote address and the phone number to have it dial to our TC equipment, it won't do it. I've gone and disabled things such as STAC and all other compressions.. I did set the Pipe to MP with BACP=Yes. Please let me know if you guys have had any success, and if you've got success, let me know how I can have it too *chuckle* Thanks in advance! -- Marius Strom <marius@alpha1.net> Professional Geek/Unix System Administrator Alpha1 Internet <http://www.alpha1.net> http://www.marius.org/marius.pgp 0x5645C228 In theory, there is no difference between theory and practice... ...In practice, there is a big difference. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.