(I got your reply in the usr-tc digest...) * That's ok. I'm not even sure what the difference is there :-) The hardware is in the country of Bolvia. There are a couple TC's around our sites, but mostly we are a Lucent shop (for now anyway). So I'm still confused over what's a Netserver and what's a HiperARC. (I'm just telnetting to these things ;-) Anyway they tell me Total Control. But as you saw, the "system" command did output something about NetServer/16. I'm still baffled ... we've got another one elsewhere, where the prompt is actually HiPER>. This one our crew in Bolivia may have changed the prompt. Their prompt is actually "IFXSucre>" but I didn't want to broadcast too much details over a non-secure channel such as a mailing list. Anyway the date was off by over a week, and the time was god knows whom's time zone ... so I set them both a little closer to US Eastern. We shall see if that makes any difference. Geeze! I'd think our guys would have at least set the date correctly! Oh what a life... THANK YOU VERY MUCH ... thanks fer the heads-up!!!!!!! :-) -----Original Message----- From: Jason [mailto:jaslist@iland.net] Sent: Friday, November 17, 2000 1:05 PM To: usr-tc@xmission.com Cc: aspicer@ifxcorp.com; valankar@ifxcorp.com Subject: Re: (usr-tc) NetServer/16 sending high Acct-Session-Time I guess If I was reading this correctly I would have seen that it's a NetServer/16. Sorry about that. I would still double check the date config, that could be causing the weird accounting info. *************** Jason Watkins I-Land NOC jwatkins@iland.net *************** ----- Original Message ----- From: "Jason" <jaslist@iland.net> To: <usr-tc@xmission.com> Cc: <aspicer@ifxcorp.com>; <valankar@ifxcorp.com> Sent: Friday, November 17, 2000 11:47 AM Subject: Re: (usr-tc) NetServer/16 sending high Acct-Session-Time
Make sure your HiPer Arc's date is set correctly. To do this type 'show date' without the ticks.. Output should look like this...
usrtc1> show date System Date: 17-NOV-2000 17:43:55 System UpTime: 46d 04:35:50
*************** Jason Watkins I-Land NOC jwatkins@iland.net *************** ----- Original Message ----- From: "Alan Spicer" <aspicer@ifxcorp.com> To: <usr-tc@xmission.com> Cc: <aspicer@ifxcorp.com>; <valankar@ifxcorp.com> Sent: Friday, November 17, 2000 11:15 AM Subject: (usr-tc) NetServer/16 sending high Acct-Session-Time
[usr-tc list] * We have a Total Control that authenticates with Radius, and we are seeing pretty often very large: Acct-Session-Time numbers in accounting records.
Has anyone seen this? Anyone have suggestion of what to do ?
Here is system info:
TC> show system
SYSTEM DESCRIPTION System Descriptor: U.S. Robotics NetServer/16, Version: V4.2.0, Built on May 17 1999 at 10:48:00. Object ID: 1.3.6.1.4.1.429.2.11 System UpTime: 2d 19:52:25 System Name: total-sre System Services: Internet EndToEnd Applications System Transmit Authentication Name: Netserver System Version: V4.2.0 TC>
* Thanks for any info or suggestions. Please cc: also to my email address, since I get a digest of this list.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.