On Mon, 28 Aug 2000, Veda Narayan wrote:
For multicast to work - you do need to have the multicast server (real or Ms) on the same wire of if its a hop away - you should have PIM dense mode enabled on all the router hops/interfaces. Also I think you have to set the multicast IGMP address on the Hiper arc. I think the command is set ip_source_address igmp <ip address of the interface>
I do see the multicast queries from the arc coming into my dialup lan: [root@bl0wfish mtrace-5.2]# /usr/sbin/tcpdump ip multicast Kernel filter, protocol ALL, datagram packet socket tcpdump: listening on all devices 21:21:42.561027 eth0 M usr2ts2.shreve.net > ALL-SYSTEMS.MCAST.NET: igmp query [ttl 1] 21:23:47.597577 eth0 M usr2ts2.shreve.net > ALL-SYSTEMS.MCAST.NET: igmp query [ttl 1] but I am unsure if its going out from my lan to the arc.........or getting thru the arc rather.
-V
----------------------------------------------- Brian Feeny, CCNA, CCDA signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.