Kirti, Here are a few examples of filters I have needed. If you have HARM loaded, just cut and paste them into new filters and that way you have them saved. I'll forward you on a complete list of filter commands in a bit. Allows http, SSL and FTP to specified IP address. ICMP as well. #filter 1 IP: 010 ACCEPT tcp-dst-port = 80; 020 ACCEPT tcp-dst-port = 443; 030 ACCEPT tcp-dst-port = 20; 040 ACCEPT tcp-dst-port = 21; 050 REJECT dst-addr != 192.85.133.35; 060 ACCEPT icmp-type = 0; 070 DENY Reverse filter. Note the ! sign. #filter 2 IP: 010 REJECT dst-addr != 10.86.100.53; 020 DENY; Multiple servers / multiple ports using AND/ACCEPT pair. #filter 3 IP: # permit access SERVER1 010 AND tcp-dst-port = 30016; 020 ACCEPT dst-addr = 10.86.100.100/32; # permit access SERVER2 030 AND tcp-dst-port = 30020; 040 ACCEPT dst-addr = 10.86.100.101/32; # permit access SERVER3 050 AND tcp-dst-port = 30024; 060 ACCEPT dst-addr = 10.86.100.102/32; # permit access SERVER4 070 AND tcp-dst-port = 30014; 080 ACCEPT dst-addr = 10.86.100.103/32; # permit access SERVER5 090 AND tcp-dst-port = 30012; 100 ACCEPT dst-addr = 10.86.100.104/32; # permit access SERVER6 110 AND tcp-dst-port = 30018; 120 ACCEPT dst-addr = 10.86.100.105/32; # permit access SERVER7 130 AND tcp-dst-port = 30026; 140 ACCEPT dst-addr = 10.86.100.106/32; 150 AND tcp-dst-port >= 20; 160 ACCEPT tcp-dst-port <= 21; 170 ACCEPT tcp-dst-port = 7; 180 DENY;