UDP: 1645 (default in tc) or 1812 - radius (authentication) 1646 (default in tc) or 1813 - radacct (accounting) Kirti S. Bajwa wrote:
Alex:
I have decided to setup a RADIUS server. Do you know which port is used by the RADIUS server?
Thanks.
Kirt
-----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Saturday, October 04, 2003 8:00 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Authentication
There has to be open radius port on linux machine. TC is using radius for authentication. You have to run radius (or maybe tacacs).
Kirti S. Bajwa wrote:
Scott:
I am not using RADIUS server. I think your suggestion is close. I currently have a system where the dial-in bank (similar to 3COM TC), which uses pap authentication & it works.
Do you have another suggestion?
Thanks.
Kirt
-----Original Message----- From: Scott Trautman [mailto:scott@gdinet.com] Sent: Friday, October 03, 2003 2:09 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modem systems.' Subject: RE: [USR-TC] Authentication
You have your ARC's primary_secret set & matching your radius server's secret (clients file?)
Scott M. Trautman 608-240-4638 Global Dialog Internet www.gdinet.com smt@gdinet.com 2049 Skaalen Rd., Stoughton WI 53589
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-- alex, ICQ# 219089461, Current status