We were able to do a soft-busy using NI-2 when our HDSP code was 2.0.60 and older -- our Telco didn't like it, though, because what they saw was 'high and wet', I think. It was when we went to 2.1.9 (which fixed the soft busy-out) that we started getting total busy when a single line was set to local out of service. Since you are already running the TCS 3.6, it looks like a different situation than we had. At 03:25 PM 4/1/02 -0500, you wrote:
At 01:17 PM 4/1/02 -0700, Sean Skogen wrote:
If you have NI2 then you can't busy out channels. You need service messaging. Older versions of the HDSP software did a 'pretend' busy-out that worked even on NI2. Newer versions of software on the HDSP do busy out right by sending a service message.
What do I need to do then to get this pretend busy? I have a combination of 2.0.51 & 2.0.81 on DSPs and 4.2.32 ARC.
Thanks,
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc