Hey, wait.... RING... SCREECH... Joel, cancel the order for that new DSP. :-) On 9/5/02 12:43 PM, USR-TC@MAILMAN.XMISSION.COM wrote to SUPPORT: -> Try changing the setting on the DSP DialTrnkType: loopStart to EAndM Type II -> -> At the very least you should configure the DSP to these same settings that -> worked for you on your other gear. -> -> Todd -> -> -----Original Message----- -> From: usr-tc-admin@mailman.xmission.com -> [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of -> support@inet2000.com -> Sent: Thursday, September 05, 2002 2:04 PM -> To: usr-tc@mailman.xmission.com -> Subject: Re: [USR-TC] HELP: Lightning HiPerDSP -> -> -> The other equipment has some differences and some different wording for the -> settins. It lists.... -> -> Line Type : dsx1ESF -> Coding : dsx1B8ZS -> RecEqualiz: linkRxEqualizerOff -> LineBuildOut: t1Pulse0dB -> fd1: : Ansi-T1-403 -> Mode: : robbedBit -> robbedbitprotocal: linkEMImmediateStart -> MessageOrientedSwitchType: ni1 -> NFAS InterfaceID: 0 -> NFAS Primary WAN: 1 -> Loobackconfig: NoLoop -> SendCode: SendNoCode -> -> So, as far as we can tell, the settins are the same on everything they cross -> over on... We're just really stumped here. -> -> Are there settings in the ARC or NMC that can cause a dead air answer? -> -> On 9/5/02 11:57 AM, USR-TC@MAILMAN.XMISSION.COM wrote to SUPPORT: -> -> -> -> -> > We get the same results on two different DSP cards, yet the T1 works on -> our -> -> > old backup equipment, so it must be OK. -> -> Why not get the proper line settings from the old equipment and use -> those? -> -> -- -> -> Lewis Bergman -> -> Texas Communications -> -> 4309 Maple St. -> -> Abilene, TX 79602-8044 -> -> 915-695-6962 ext 115 -> -> -> -> _______________________________________________ -> -> USR-TC mailing list -> -> USR-TC@mailman.xmission.com -> -> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -> -> -> -> -> _______________________________________________ -> USR-TC mailing list -> USR-TC@mailman.xmission.com -> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -> -> -> -> -> _______________________________________________ -> USR-TC mailing list -> USR-TC@mailman.xmission.com -> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc