Sorry about that.. The quads are turned off but are in slot 1 The T1 is plugged in to slot 2 The other slots are not in use! I enabled them yesterday when i was working on getting slot 2 listed! At 04:50 PM 1/21/2004, you wrote:
Is this the same chassis that has quad modem(s) in it? I don't see the quads. You might want to try a "list interfaces" and make sure the interfaces you are hitting are all up/up. Which slot are you hitting by the way?
Todd ----- Original Message ----- From: "Dev" <dev@umpa-us.com> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Wednesday, January 21, 2004 4:40 PM Subject: Re: [USR-TC] Timeslot Unavailable
HiPer>> list chassis Slot Owner Description Ports Type Console 1 YES --EMPTY-- 0 STATIC NO 2 YES 24 Channel High Density Modem 24 STATIC NO 3 YES --EMPTY-- 0 STATIC NO 4 YES 24 Channel High Density Modem 24 STATIC NO 5 YES 24 Channel High Density Modem 24 STATIC NO 6 YES 24 Channel High Density Modem 24 STATIC NO 7 YES 24 Channel High Density Modem 24 STATIC NO 8 NO 24 Channel High Density Modem 24 STATIC NO 9 NO 24 Channel High Density Modem 24 STATIC NO 10 NO 24 Channel High Density Modem 24 STATIC NO 11 NO 24 Channel High Density Modem 24 STATIC NO 12 NO 24 Channel High Density Modem 24 STATIC NO 13 NO 24 Channel High Density Modem 24 STATIC NO 14 NO 24 Channel High Density Modem 24 STATIC NO 15 YES --EMPTY-- 0 STATIC NO 16 NO --EMPTY-- 0 STATIC NO
At 04:30 PM 1/21/2004, you wrote:
what do you see when you do a "list chassis"?
Todd ----- Original Message ----- From: "Dev" <dev@umpa-us.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 21, 2004 3:38 PM Subject: [USR-TC] Timeslot Unavailable
This List ROCKS!
Okay I now have access to the correct modems on the t1 card! Now i am trying to dial out and i get a no carrier error (carrier light is on) I do an ATI6 and see: Failed to Connect Reason is Timeslot Unavailable
When i was on the phone with my Telco they are not getting a wink when they tried dialing my number?
I am thinking this is all associated.
I do have the TCM and have it set for wink but no go.
I am not able to plug in via the consol port (no cable )
Any Clues and suggestions?
Thank you to everyone who has helped and will help in the future!!!
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc