Kirk- On my 2051 cards, I could not get busy-out to work no matter what I did when I had NI2 PRI's. Swithced to 5ESSCustom, now it works like a charm. -- Scot
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Kirk Mitchell Sent: Monday, April 01, 2002 3:25 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] More NI2 issues
At 01:17 PM 4/1/02 -0700, Sean Skogen wrote:
If you have NI2 then you can't busy out channels. You need service messaging. Older versions of the HDSP software did a 'pretend' busy-out that worked even on NI2. Newer versions of software on the HDSP do busy out right by sending a service message.
What do I need to do then to get this pretend busy? I have a combination of 2.0.51 & 2.0.81 on DSPs and 4.2.32 ARC.
Thanks,
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc