Quoting Randy Lyle <robotnic@forcomm.net>:
Does anyone know of a program that you can use to create a setup file for a chassis that is on an IP address, run it and have the chassis setup for different address?
What I want to do, is re-configure a whole chassis Ip pools, NMC Ip, ARC
Ip, and all else. Would be nice if I had a program that could view and edit a .CFM, or .NVR and then re-upload the changes.
Well, there is no text file etc to do this. However there is a easy way to do this. So you have a working chassis - say chassis-1 and you want all the configuration of that chassis on a new chassis chassis-2 First on chassis-1 you do this. set bulk-file <filename> save configuration - Now you tftp this file (binary mode) to a location or to the chassis-2 hiperarc use the following commands set bulkfile <filname> reboot This load the chassis-1 configuration to chassis-2, it does include the IP address everything, so in order to get rid of the IP address, I normally configure chassis-1 with a IP network address for the second interface with the IP address that chassis-2 is going to have and only place ethernet connection on chassis-2 for interface 2 This way no configuration changes are necessary -V
Does anyone have an easy solution for this? TIA Randy robotnic@forcomm.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
=========== -V ========== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.