14 Nov
2002
14 Nov
'02
8:38 p.m.
Hopefully someone can point me in the right direction before I start breaking things around me ;-) I'm trying to setup a hiper arc so that you can telnet into it via some other socket then 23 and attach to 1 or more modems on a dsp in that chassis to use for dialout. I've done this before without issues so I'm a bit perplexed as to what the problem is. After making the necessary config entries I telnet to my arc port 6002 and whether I specify auth=yes or auth=no I get this from my telnet facility: Facility "Telnet", Level "UNUSUAL":: CIP_GET_SHARED_DEV_REQ failed: ((bad status)) 0x43495071) The only thing I can think of from my research is that the modem group I specified is not available...but it is. Todd