Hello, You have not used any "add l2tp lns ..." command. Could you explain what the "add l2tp lns ..." command is for and in what circumstance it is used for. ----- Original Message ----- From: <ved@iyka.com>
Quoting Donald Baud <dbaud@bigfoot.com>:
I am trying to terminate an L2TP tunnel on a HiperArc 5.0.9
The telco provided the following info: L2tp peer Username : clientside Peer Tunnel password : client Telco peer name : telco Client Interface ip address: 10.10.100.1 telco Interface ip address: 10.10.100.8
The hiper arc has LNS enabled by default, here are the commands that you need add user clientside password <some unique password > set tunnel user clientside password <client> { This is tunnel password} set tunnel user clientside type l2tp client 10.10.100.1
I am not sure but you may have to setup your HiPer arc system tranmit name as telco - but from the above info its not clear whether you want the client system name as telco or hiper's
-V
Could someone tell me what goes where in the HiperArc config.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.