This is particularly true when using TCM 8.2.96 with any TCS version below 4.5 -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Tuesday, April 27, 2004 9:04 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] TCM Error on E1 DSP ? Had not even checked software versions on it yet. I'll give that a look. Thanks! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Tuesday, April 27, 2004 7:43 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] TCM Error on E1 DSP ? Is the code running on the NMC within the same release version as total control manager? I've had issues pulling up chassis's or certain things when running at different version levels. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox@foxcomputers.com> To: <usr-tc@mailman.xmission.com> Sent: Monday, April 26, 2004 11:13 AM Subject: [USR-TC] TCM Error on E1 DSP ?
Having a problem. Trying to help someone out configuring a chassis,
and I can't access a 30 channel DSP (E1 version) with my TCM.
Here's the error:
I click the lights at the top of the card. Click
Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File".
Anyone have any suggestion, or the correct file I need to make it
work?
Thanks,
Joel
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc