I have been told by support personnel that once your ARC is flashed to the version 5.x code you wouldn't have the option to downgrade back to version 4.x code. If this works (you do get a working downgrade to ver 4.x from 5.x) Please let me know. Dave Lajoie RA Administrator North Country Internet Access E-Mail: dave@ncia.net On Tue, 26 Mar 2002, Veda Narayan wrote:
Set the hiper arc to boot from the tftp server and reboot the hiper arc, make sure you have the code on the tftp server. Not exactly sure about the command but it is like this
set bootrom ip inter eth:1 address x.x.x.x tftpserver <ip of tftp server> gateway <ip of gateway> netmask <netmask of arc> loadfile <the arc code name on the tftp server> tftp_boot once
save all
and then reboot the hiper arc, it will then go to the tftp server and load the code - this should fix your problem.
-V
----- Original Message ----- From: "Mike Greene" <mikeg@rockisland.com> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, March 26, 2002 5:52 PM Subject: [USR-TC] Downgrading ARC from 5.1.99 to 4.2.32
I've downloaded the code to the ARC at least 10 times and every time I reboot the friggin card it keeps coming back as 5.1.99, I've tried everything except a console load.
What the heck does a guy have to do to get the card downgraded to 4.2.32!!
This is getting really frustrating!
- Mike
------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc