zaza Password = "UNIX" User-Service-Type = Framed-User, Framed-Protocol = PPP, Framed-Address = 207.0.68.214, Framed-Netmask = 255.255.255.255, Framed-Route = "207.0.68.213 207.0.68.214 1" Framed-Compression = Van-Jacobsen-TCP-IP, Idle-Timeout = 0, Framed-MTU = 1500 When this user logs in the local net route for the hiperarc is gone. They logout and it is back again. Like this it doesn't break the local net rout, but then again the 2nd address doesn't work for the customer. zaza Password = "UNIX" User-Service-Type = Framed-User, Framed-Protocol = PPP, Framed-Address = 207.0.68.214, Framed-Netmask = 255.255.255.255, Framed-Route = "207.0.68.213/32 207.0.68.214 1" Framed-Compression = Van-Jacobsen-TCP-IP, Idle-Timeout = 0, Framed-MTU = 1500 What is the correct way to route a 2nd IP address, or small subnet, to a dialup user? Brian Becker wrote:
We've been told by 3Com reps that when Radius shows "Lost-Carrier" as the disconnect reason, it is solely caused by the user modem shutting down with no warning or physical line being terminated. That a "Lost-Carrier" will not be displayed if the call was terminated by the Total Control modem.
We've started to show a large number of disconnections in an area and all of them are reported in Radius as "Lost-Carrier." Before we start telling customers that it "Isn't our equipment" I'd like some confirmation.
Can anyone verify that? or direct me to some literature that would explain the reasons for a "Lost-Carrier" to be transmitted from a Total Control box to Radius Accounting.
Thanks, Brian
Brian Becker President, Poplar Bluff Internet http://www.semo.net TotallyFabricated.com Software http://www.TotallyFabricated.com Home of JerusalemPerspective.com http://www.JerusalemPerspective.com Personal Page http://Tonionio.com / http://BenjaminBecker.com
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.