the dip switch 5 needs to be turned down to reflash code. On Mon, 4 Oct 1999, Scott Trautman wrote:
Time to send it back to 3Com to have them look at it. That would be my next step.
SMT
-----Original Message----- From: Dataheart [mailto:lists@dataheart.net] Sent: Monday, October 04, 1999 1:45 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Netserver problem
ok, I have re-flashed the card and still the same thing flashes 13 times then flashes quickly then solid green and the loop is endless. Ths console is also blank.
Any other ideas?
Thanks, Aaron
Scott Trautman wrote:
Anything on the console port? Bootup messages? (actually don't think you would see those if I recall correctly, just a login prompt when it is up...)
Get out the pcsdl, source and re-upload it via serial cable. Hint: set your serial port to at least 57600 w/dip switches.
Sounds like your flash got corrupted.
Or send it back to 3Com and they'll do probably the same thing.
SMT
-----Original Message----- From: Dataheart [mailto:lists@dataheart.net] Sent: Thursday, September 30, 1999 10:49 AM To: usr-tc@lists.xmission.com Subject: (usr-tc) Netserver problem
Well I'm just full of problems arent I :-D
I have a Netserver card that once powered up the rn/fl led flashes green on and off 13 times, then flashes quickly for a few seconds, then goes solid green for a while, then repeast the process. Anyone know whats going on?
Thanks, Aaron
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.