On Behalf Of Todd Bertolozzi So are you trying to connect locally or via radius or both?
RADIUS AUTHENTICATION SETTINGS Local Authentication is: DISABLED Remote Authentication is: ENABLED
Try doing an add user ? to add a user locally.
I certainly could, however I'd need to enable local authentication (it's currently disabled). It might be a good test, but the objective is to do it via radius.
What's your config look like when you issue this command:
show ppp settings
PPP SETTINGS PPP AUTHENTICATION DIAL_IN Users Authenticate: ANY PPP Authentication Preference: PAP System Transmit Authentication Name: HiPer PPP offloading: ENABLED CCP will be attempted for call type(s): NONE System MTU : 1514 Primary NBNS Server address: 0.0.0.0 Secondary NBNS Server address: 0.0.0.0 DNS configuration Usage: PPP-DNS Primary PPP DNS Server address: 192.168.100.10 Secondary PPP DNS Server address: 192.168.100.11 PPP session start message: Send Accounting for PPP Abnormal Disc: ENABLED PPP Address Field Compression: ENABLED PPP Protocol Field Compression: ENABLED PPP Multilink PPP: ENABLED PPP BACP and BAP: DISABLED PPP Bap Hunt Group Phone Number: PPP Receive ACCM: DISABLED PPP Negotiated Callback: DISABLED PPP Process RADIUS Challenge during PAP: DISABLED PAP Authentication Retries: 3 PPP Send EDO status: ENABLED