You can load configuration information from 1 dsp to another by using the "load from" button in the program settings option. To change the IP on a HiPer ARC use the reconfigure ip network <network name> address <ip address> interface <interface number>' Hope this helps. At 11:48 AM 2/5/2002, you wrote:
For those of you saw my previous post, thanks for the help. I figured out that my NMC didn't have an IP assigned to it, but the ARC did.
Here is my dilema...
I'm trying to accomplish two things. I had six hiperDSP cards in the chassis and I just added a seventh. I'm having a hard time figuring out why this card refuses to sync with the PRI.
Is there an easy way to take the configuration from one or all of the existing hiperDSP cards and mirror it on to the seventh card?
Second, now that I have the TCM working, how can I change the IP address of the ARC? The TC is in IP space I need to renumber out of ASAP, which is my biggest dilema.
If there is a command line option to renumber it that might work easier I'd opt for that, but I am under the impression it's easier to accomplish this through the TCM.
Thanks in advance.
-Jeff Garvas
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
************************ Jason Watkins I-Land NOC jaslist@iland.net ************************