I once had to take it 1 step further. I used 14 dual T1 cards and nics in a chassis with a CAC Widebank 28 DS-3 Mux zip tied to the top to busy out a DS3 full of CT1 trunks when we were moving our POP last year. Works great. Be sure to check your clocking settings and master/slave mode on the cards if you're using multiple T1 NAC's in a chassis. At 03:38 PM 11/17/00 -0800, you wrote:
I have a need to busy out some T1's that have no DSP cards on them anymore, but I do have a few old T1 cards sitting here.
Was thinking of popping them in, then just setting them to busy out all DS0's, and plug the T1's into that.
Will this work?
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
--- Clayton Zekelman Managed Network Systems Inc. (MNSi) 875 Ouellette Avenue Windsor, Ontario N9A 4J6 tel. 519-985-8410 fax. 519-258-3009 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.