On Mon, 20 Mar 2000, Brian Gordon wrote:
What is the best way to configure a framed route in radius sending to a Hiper arc for 1 specific user. Using a subnet /29?
If you just want to route a subnet, no need for "Framed-Route": joeblow Auth-Type = "Unix-PW" Service-Type = "Framed-User", Framed-Protocol = "PPP", Framed-IP-Address = "208.214.45.1", Framed-Netmask = "255.255.255.248", Framed-MTU = "1500", Port-Limit = "1", Framed-Routing = "None", Framed-Compression = "Van-Jacobson-TCP-IP" But if for some reason, you were routing him a different subnet thru an IP he was assigned, you would do like: joeblow Auth-Type = "Unix-PW" Service-Type = "Framed-User", Framed-Protocol = "PPP", Framed-IP-Address = "208.232.62.1", Framed-Netmask = "255.255.255.255", Framed-Route = "208.214.45.0/29 208.232.62.1 1", Framed-MTU = "1500", Port-Limit = "1", Framed-Routing = "None", Framed-Compression = "Van-Jacobson-TCP-IP"
Brian
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.