Hi all, I'm pretty sure I've got a bad DSP, but I thought I'd ask if there's something I'm missing. Here's the info: 2 HARC's, 10 DSP's w/T1's, 1 DSP for spare. I set the proper ownership for cards and have verified by doing a list chassis. The DSP in slot 10 all of a sudden stops taking calls. I plugged the T-Berd into the circuit - the telco side shows no activity, but all channels on the DSP side show off hook - which busy's out the circuit. If I throw a loopback in the circuit at the DSX panel, leave it for a minute, then remove it, the DSP starts taking calls for about a day, then the same thing happens. If I move the T1 to the spare card, it works fine. Any ideas? __________________________________ Justin Ellison System Administrator InternetUSA sysadmin@nebi.com http://nebi.com 800-603-3502 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.