Thanks for the info. We actually have 7 PRI's on our HiperARC, but I wanted to get a general idea of how many ip's we were looking at. We started our Hiper chassis with 4 PRI's on it and I had set the ip pool size to 140 to be safe. I now have it set to 168. We also have an old NetServer TC chassis with 2 PRI's on quads, and I remember we had to set the pool size quite a bit higher than the actual number of trunks. I just didn't know if it applied to the Hiper's also. Thanks again for the help. Jason. Tatai SV Krishnan wrote:
Depends upon your maximum number of ports. So in your case you need an ip pool of 23 address for each pri card.
krish
On Mon, 20 Dec 1999, Jason P. wrote:
We have a HiperARC chassis with PRI service. Can anyone give me a suggestion on what the recommended ip pool size would be for one PRI span (23 modems)? I haven't been able to find this info anywhere in any documentation.
Thanks in advance.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.