With my recent upgrades of all the equipment in my TC1000, (NMC, Arc, DSPs) all the files I had were .dmf files. Not really sure what to tell you. :( I've tried recreating a situation where it asks for .nac, but can't seem to get my TCM to do it. -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Esteban Troncoso Suarez Sent: Tuesday, September 10, 2002 3:31 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] Upgrade Casen Yes. I'm trying to upgrade with this procedure. I'm working with E1 (PRI & R2). When I try to upgrade DSP with the file "he030513.dmf" the procedure fail because TCM aske for any file with extension *.nac. The procedure worked well with HiperArc but with NMC and DSP this fail. The Dialog Box looking just for hd*.nac but I just have *.dmf Do you know with is the correct extension for every file? Thanks Esteban ----- Original Message ----- From: "Casen" <Xeen@Aros.Net> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, September 10, 2002 4:22 PM Subject: RE: [USR-TC] Upgrade
Esteban,
I'm running TCM 8.2.6 as well. When I go to software download after selecting a card, I get a grid showing which card I have selected, what is in the slot, and then a couple columns titled NAC/DMF File, SDL File, etc. Double clicking in the NAC/DMF file field, I'm given a
Windows Open File dialog box looking in a directory for hd*.dmf (Because I'm on a HiperDSP card, the first two letters might change for Arc/NMC) and from there, I just select the firmware file I want to
use.
I'm using PRI though, so the .nac file might be because you're using E1's. Not really sure about that. But anyway, that's the process I used to load my DMF files.
Casen
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Esteban Troncoso Suarez Sent: Tuesday, September 10, 2002 2:08 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Upgrade
Could you tell me how can I upgrade DSP, HiperArc and NMC of TotalControl ?
The TCM version is 8.2.6 The NCM version is 6.2.17 The E1 PRI version is 2.0.60 The E1 R2 version is 2.0.20 The HiperArc version is 4.2.32
The new version are NMC: 8.6.3 E1 PRI: 3.5.13 E1 R2: 3.5.13 HiperArc: 5.3.1
When I'm trying to upgrade the card, the TCM ask me for files *.nac , but my files are *.dmf.
Thanks Esteban
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc