Any luck Joel? Todd ----- Original Message ----- From: "Todd Bertolozzi" <berto@core.com> To: "'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'" <usr-tc@mailman.xmission.com> Sent: Thursday, September 16, 2004 6:45 PM Subject: RE: [USR-TC] Login Question
So you are able to access the "failed" arc's config? Why not do a "show all configuration" and pick through that?
Todd
-----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Thursday, September 16, 2004 2:06 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Login Question Importance: High
Got a customer with a Hiper ARC that failed - trying to duplicate it's configuration here, and can't figure something out.
What I need is that when a user connects, they are not prompted to login, but instead immediately telnet to a host on the network. (that host has it's own login/authentication, so nothing else is necessary)
In looking at the config on the card that failed - If I do a "list login_hosts" there's nothing there - so I don't think it's being done that way. Or maybe this is a setting that got lost? I dunno.
Basically I need to do 2 things:
1. Disable the default login prompt and authetication in the ARC, and connect users to the network without authentication. 2. Telnet the user to a specific IP address once connected.
Anyone?
Thanks,
Joel
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc