In TCM go to cconfigure / program settings / line interface options line interface sourcefield/ it should say pri not nic or t1 I would recommned that you use the netsvr software as well. That can easily make the modems active and make sure the security is set to enabled so they accept logons. If you put a console to the pri console port make sure all the cards can be seen from the pri thanks eric At 08:14 AM 3/1/00 -0600, you wrote:
I am still down. does anyone have an idea?
show all shows all modems A R P I don't know where to see the priTdm setting
HELP thanks david gower
On Mon, 28 Feb 2000, David Gower wrote:
I have a TC with dual Pri card and 48 modems on quad cards. it has worked fine for 2 years. Friday it stoped authenticating with radius. I got that fixed and now only the first 16 modems answer. After that you get a fast busy.
any help would be grately appreciated
on the netserver, does "show all" show these ports as "A R P"? or "A I P"? etc?
check that the line interface is "priTdm" and not "nic".
also its good to make sure "packet bus answer only" is enabled (i think this is under call control options)
thanks david gower ************************* * David Gower * * Gower.Net * * 1607 S. Boldt * * Tyler, Texas 75701 * *************************
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
************************* * David Gower * * Gower.Net * * 1607 S. Boldt * * Tyler, Texas 75701 * *************************
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.