Thanks for Cenk for information I rebooted my TC1000,,, and now its working fine.... There was only two kind of status on that dsp (e1/r2), Idle and Disc,,, I havent seen Dial in , Dial out,, Conn In ,,,etc... But after rebooting TC , I start getting Conn in also.. Thanks pankaj ----- Original Message ----- From: "Cenk Gunel" <cenkg@ttnet.net.tr> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, October 08, 2002 6:24 PM Subject: [USR-TC] Re: USR-TC digest, Vol 1 #294 - 1 msg
The following may help:
DS0 Status Definition
Idle The link is open, but not in use.
Dial In An incoming call has been received for this DS0 and is in the
process of being connected.
Dial Out An outgoing call is being initiated for this DS0 and is in the
process of being connected.
Conn In An incoming call has been connected on this DS0.
Conn Out An outgoing call has been connected on this DS0.
Disc A call is being disconnected.
Fchan This DS0 is reserved for framing.
Lpbk The link between the DSP multispan SS7 and the access router
card is in a loop back state.
----- Original Message ----- From: <usr-tc-request@mailman.xmission.com> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, October 08, 2002 3:27 PM Subject: USR-TC digest, Vol 1 #294 - 1 msg
Send USR-TC mailing list submissions to usr-tc@mailman.xmission.com
To subscribe or unsubscribe via the World Wide Web, visit http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc or, via email, send a message with subject or body 'help' to usr-tc-request@mailman.xmission.com
You can reach the person managing the list at usr-tc-admin@mailman.xmission.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of USR-TC digest..."
Today's Topics:
1. Hiper DSP showing Disc (RX 0001 TX 1101) (pankaj)
--__--__--
Message: 1 From: "pankaj" <pankaj@worldgatein.net> To: <usr-tc@mailman.xmission.com> Date: Mon, 7 Oct 2002 19:28:05 +0530 Subject: [USR-TC] Hiper DSP showing Disc (RX 0001 TX 1101) Reply-To: usr-tc@mailman.xmission.com
span1>di ats 20 Idle N/A UNBLOCKED 0x00000000 21 Idle N/A UNBLOCKED 0x00000000 22 Idle N/A UNBLOCKED 0x00000000 23 Disc 022 UNBLOCKED 0x00131501 24 Disc 023 UNBLOCKED 0x00131601 25 Idle N/A UNBLOCKED 0x00000000 26 Idle N/A UNBLOCKED 0x00000000 27 Idle N/A UNBLOCKED 0x00000000
span1>di ata 10 RX 1001 TX 1001 26 RX 1001 TX 1001 11 RX 1001 TX 1001 27 RX 0001 TX 1101 12 RX 1001 TX 1001 28 RX 0001 TX 1101 13 RX 1001 TX 1001 29 RX 0001 TX 1101 14 RX 1001 TX 1001 30 RX 1001 TX 1001 15 RX 1001 TX 1001 31 RX 1001 TX 1001
Hi all,,,, Above is the status of my Hiperdsp which I accessed using console.
Now on that dsp users are unable to land, It was working ok before one hour and suddenly stop accepting users call.
I have first time seen "Disc " in "di ats " What does it mean.??
Regards Pankaj Patel
--__--__--
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
End of USR-TC Digest
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc