Hi all, I've tried searching the 3Com support site and etc. several times over the last several days about this, but if the answer's there I'm managing to miss it completely: For some time we have been having entries such as the following appearing in our radius log: "S12 didn't get online! status=-1, connect_fail=79, link_fail=31" ...where the "connect_fail=" value varies but the "status=-1" and "link_fail=31" values are always the same. For example, between 04:00 and 13:00 today there were 69 such entries, all from our USR equipment, with the value and count for "connect_fail=XX" as follows: connect_fail=3 -- 1 entry connect_fail=13 -- 28 entries connect_fail=21 -- 2 entries connect_fail=36 -- 16 entries connect_fail=79 -- 19 entries connect_fail=80 -- 3 entries I'd thought these were from the set of "Failure-to-Connect-Reason" values in the Vendor Specific Attributes, but that doesn't seem to be it since there are no Failure-to-Connect-Reason values for 79 and 80. Can anyone help me decipher this, please? TIA, - David - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.