Good information, thanks Krish. One question, how do you remove the port from static configuration. das Tatai SV Krishnan (tkrishna@bubba.ae.usr.com) spake:
If you have setup a chassis in which you have programed a slot to be static and save that configuration, once done it will remain static unless and untill removed manually.
For your ports to be dynamic, here is what you need to do
First remove the port from static configuration Then enable nmc chassis awarenss. When you do a sh nmc you will see three options in there
nmc chassis awarness DSA DSA Idle rebla
if you have only one hiper arc in the chassis then enable nmc chassis awarness and disable the other two.
If you have more than one hyper arc and want to maintain dynamic configuration then enable all three.
If you have two hiper arcs and you want to make static configurations disable all the three in nmc chassis awarness
and then reboot the card.
krish
On Wed, 26 Jan 2000, David Swearingin wrote:
You wrote:
From: D A Substanley <das@gol.com> To: usr-tc@lists.xmission.com Date: Thu, 27 Jan 2000 12:33:12 +0900 Subject: Re: (usr-tc) static to dynamic
Enable nmc chassis awareness
das
Didn't work for me.
David
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.