Hi *, On Wed, Nov 12, 2003 at 02:17:26PM -0400, ISN Support Staff wrote:
Hi Joel,
Bingo! I had to bring a new radius server online at the same time we switched to the HiPer system (the old one wasn't sending back the response packets to the HiPer) and I forgot to remove the MTU line from the users file. Doh! Thanks for the tip.
Uhm, despite this being solved... I'm experiencing slow connections and even drops with some "conexant" HXF-PCI-modems. I tried several combinations: TCS-4.5 w/ and w/o V.92 switched on ( if it matters anyway) TCS-4.7 w/ and w/o V.92 switched on each 1. orig US-Robotics 56k PCI flash installed ( <= V.90) and 2. conexant-generic driver published on their web-site ( <= V.92) Over 95% of all tries ended in transfer-"speeds" at 500-600cps. Sh...low, eh?! The best transfer-rate was achieved with: AT&F+MS=V34,1,75,28800,75,33600 which gave me a "V34plus" connection on the server-side. Rate ca. 3kB/s and stable. Any ideas VERY welcome, as this kind of beast is distributed widely here in Germany :-\ And of course I do NOT want to change much if any on the server-side. Thnx in @vance, Oliver. [...] -- Oliver.Francke@telefonica.de fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking.