Also sprach Stephen Amadei
The day before leaving for ISPCON,
Was good to meet you there. :) OK...gonna rearrange these slightly to answer the easy ones first. :)
This is probably a stupid question, but is there anyway to transfer an X2 key?
No. The key is tied to the serial number of the card, so it can't get transferred.
What should I try now? I'd like to update the system to 6.1.17, but does that require 8 Meg or Flash or DRAM... I have 8 Flash, but 4 DRAM right now...
You'll need at least 8 megs of RAM for the 6.1.17 code, I don't recall if it requires 16 or not, but I do know that you need at least 8...BTW, I'd suggest 6.1.81 as there are some security issues with SNMP in the 6.1.17 code.
IIRC, 6.0.9 should like the HiperDSP's fine... right?
Nope. Thus the difference between 6.0.x and 6.1.x. The 6.0.x code was made available so people could still use it on 4/2 NMC's if all they had were non-HiPer cards. If you have HiPer cards though, you have to have at least 6.1.x. Of course, if you have an HiPer NMC, it only runs the 6.2.x code. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.