Listed below is the info from my local Mac Guru. Hope it helps... Yup, but it's not trivial. You need to edit the modem script, which lives in the modem scripts folder inside the extensions folder which is inside the system folder. The modem scripts are just text documents, but they have special type and creator codes which you must restore using ResEdit or some other such utility. The easiest way to do this, though is to use Apple's Modem Script Generator Utility available at <http://asu.info.apple.com/swupdates.nsf/artnum/n10664>. Personally, I just edit the scripts manually because I'm a dweeb and like to have absolute control over what I'm doing, but the fact is that the script generator generates the exact same CCL code that I do except the Script Generator's code is commented and mine isn't. You select the Modem Script in the Modem Control Panel. If all of this is too confusing, tell me exactly what you want, and I'll edit some scripts for you that you can just pass on to customers. Apple has some prewritten scripts on their website that limit the connection to v.34, but I think that's probably overkill. In addition, Ross Barkman has written a series of scripts for the G3 powerbooks, which allow the user to use a trial and error method to get the best performance vs stability compromise. Ross's scripts can be located by doing a search at <http://www.versiontracker.com> for Modem Script. This search will also point you at a bunch of other script options that may be of use. At all costs, avoid Modem Puppet scripts as they don't work in the real world. HTH Old Bill Fuller Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.