How do I get the "Interface:" changed from "Unassigned" to "ptp29" and set the default MTU to 1500? like the previous 24 ports are? -Tom On the NetserverPRI is type SHOW S29 and I get... ----------------------- Current Status - Port S29 --------------------------- Status: IDLE Input: 0 Parity Errors: 0 Output: 0 Framing Errors: 0 Pending: 0 Overrun Errors: 0 Active Configuration Default Configuration -------------------- --------------------- Port Type: Netwrk Netwrk (Dial In) (Security) Login Service: PortMux PortMux Device Service: Telnet@6029 Telnet@6029 Modem Stat: READY ACTIVE Databits: 8 8 Stopbits: 1 1 Parity: none none Flow Control: None None* Modem Control: on on HDLC Framing: PPP in modem PPP in modem SLIP Framing: SLIP in NETServer SLIP in NETServer Remote Host: 0.0.0.0 0.0.0.0 Interface: Unassigned (SLIP,Listen (SLIP,Quiet) Mtu: 0 0