I am having some difficulty getting VPN-Neighbor to work. My setup is as follows: HyperArc Version: 4.2.32 IEA Next Hop Routing: ENABLED IEA Send Unsolicited Proxy Arp: DISABLED IEA Force Next Hop Route: DISABLED IP proxy ARP for all dialin addresses: DISABLED IP RIP Flags: METRICS SEND_REQUEST I am using an altered version of Livingston's 2.1 Radius. On the Livingston side it _appears_ that the VPN-Neighbor attribute is being sent: Thu Feb 3 11:29:14 2000: [24758] sending accept to 198.144.34.36/1645.66 Thu Feb 3 11:29:14 2000: [24758] Service-Type = Framed-User Thu Feb 3 11:29:14 2000: [24758] Framed-Protocol = PPP Thu Feb 3 11:29:14 2000: [24758] USR-PW_VPN_Neighbor = 198.144.34.46 Thu Feb 3 11:29:14 2000: [24758] Framed-IP-Address = 255.255.255.254 Thu Feb 3 11:29:14 2000: [24758] Framed-MTU = 1500 Thu Feb 3 11:29:14 2000: [24758] message sent to 198.144.34.36/1645.66 code=2, length=50 But when I am doing a "mon radius" for the user on the USR box it only shows receipt of all of the attributes with the _exception_ of the VPN Neighbor attribute. Does "mon radius" show all attributes transmitted, or only those that are acted on or understood? I'd like to know if the VPN-Neighbor attribute is even being transmitted (although from the Radius stats, it looks like it is.) Thanks! -- ----- G Douglas Davidson | CityNet, Inc. douglas@city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.