GiGoNET Support wrote:
Hey Joel,
I've just about got this working.. I think I've missed a piece. There are no alarms. I call the calls come in... but a modem on the dsp doesn't seem to get mapped to the call.
*Slot1 DSP/span1> display atstat*
Tslot Status Modem Status Call ID Action Span Connect Srvc State Queued Status 01 Idle N/A IS 0x00000000 NONE Ok 02 Idle N/A IS 0x00000000 NONE Ok 03 Dial In 003 IS 0x00020002 NONE Ok 04 Idle N/A IS 0x00000000 NONE Ok 05 Idle N/A IS 0x00000000 NONE Ok 06 Idle N/A IS 0x00000000 NONE Ok 07 Idle N/A IS 0x00000000 NONE Ok 08 Idle N/A IS 0x00000000 NONE Ok
*Slot1 DSP/span1> display atconfig*
Tslot Block Assigned Service ID Description Call Type Chan State 01 NONE 01 IS
Cheers, -Tom
02 NONE 02 IS
When you do a list chassis does the arc show that it owns the slot in question and display the correct modem type? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962