Also sprach Greg Long
Can anyone tell me if there is a configuration option to turn on or off logging of IP addresses within the USR Total Control Enterprise Hub?
What do you mean by logging of IP addresses? At what point? On what type of connections? If you're talking about dial-in, RADIUS should log the IP address assigned in the RADIUS accounting message.
Do I have to Telnet in to do it?
If you're looking for the IP address of a dial-in user, it would be in your RADIUS server.
Is there a way to determine IP addresses from Port ID's?
Again, RADIUS, or you could use SNMP probably to query the Arc and find out what IP address is associated with the port number. I don't know what OID you would grab off the top of my head, but it shouldn't be hard to find.
Also is there a way to recover or reset the Telnet password to a USR Total Control Enterprise Hub. I haven't had access to it before and I can't find the password, nor does anyone recall what it was.
I assume you're talking about Arc at this point. Worst case, if you have console access, you can delete the whole config of the Arc during the boot menu...option 13 I seem to remember, but don't quote that as gospel...you also might just try to see what sort of access you get at the console...default is to not require a userid and password on the console, so if you plug into the console you might be able to get full access without a userid and password. If they've turned on login on the console though you'll need to fall back to other methods. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.