On Tuesday 13 August 2002 12:52 pm, Ralph Forsythe wrote:
Ok, does anyone have a brief explanation, or example of a config, for using MRTG with a Netserver / Total Control? I would like to monitor the number of modems in use out of the total active ports (which could change from time to time - re-making the config is ok there if I need to), and possibly the total bandwidth usage - either per port, total, or both.
Make sure you look this over and change what needs to be changed. NOTE - I like my graphs to grow left not right so you may want to add the "growright" option. ###################################################################### # Description: 3Com Corporation HiPer Access Router Card Built on Jan 10 2002 at 12:07:57. # Contact: Lewis Bergman # System Name: totconabi1 # Location: Abilene #..................................................................... # ### Concurrent Modem Users >> Descr: 'U.S.Robotics Concurrent User's ### # This Report File Template measures Concurrent Modem Users # on a 3Com HiPer Arc # # Example CFGNAME: [DEVICE NAME]-hiper_arc_concurrent_users Target[3comTC.modem]: 1.3.6.1.4.1.429.4.2.1.10.0&1.3.6.1.4.1.429.4.2.1.10.0:comm@192.168.1.203 MaxBytes[3comTC.modem]: 192 Unscaled[3comTC.modem]: dwm Title[3comTC.modem]: totconabi1 3Com Total Control Modem Usage PageTop[3comTC.modem]: <H1>totconabi1 3Com Total Control Modem Usage</H1> Options[3comTC.modem]: gauge, unknaszero YLegend[3comTC.modem]: Modem Users ShortLegend[3comTC.modem]: users Colours[3comTC.modem]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff Legend1[3comTC.modem]: Concurrent Modem Users Legend2[3comTC.modem]: . Legend3[3comTC.modem]: Max value per interval on graph Legend4[3comTC.modem]: . LegendI[3comTC.modem]: Users: LegendO[3comTC.modem]: . WithPeak[3comTC.modem]: ymw #------------------------------------------------------------------ Target[3comTC.pub]: 3:comm@192.168.1.203 MaxBytes[3comTC.pub]: 1250000 Title[3comTC.pub]: totconabi1 (HiperARC): Ethernet pub PageTop[3comTC.pub]: <H1>totconabi1 Traffic Analysis for Ethernet pub </H1> <TABLE> <TR><TD>System:</TD><TD>totconabi1 in Abilene</TD></TR> <TR><TD>Maintainer:</TD><TD>Lewis Bergman</TD></TR> <TR><TD>Interface:</TD><TD>Ethernet Driver (3)</TD></TR> <TR><TD>IP:</TD><TD>No hostname defined for IP address (208.29.17.203)</TD></TR> <TR><TD>Max Speed:</TD> <TD>1250.0 KBytes/s (ethernetCsmacd)</TD></TR> </TABLE> #--------------------------------------------------------------- Target[3comTC.priv]: 4:comm@192.168.1.203 MaxBytes[3comTC.priv]: 1250000 Title[3comTC.priv]: totconabi1 (HiperARC): Ethernet priv PageTop[3comTC.priv]: <H1>totconabi1 Traffic Analysis for Ethernet priv </H1> <TABLE> <TR><TD>System:</TD><TD>totconabi1 in Abilene</TD></TR> <TR><TD>Maintainer:</TD><TD>Lewis Bergman</TD></TR> <TR><TD>Interface:</TD><TD>Ethernet Driver (4)</TD></TR> <TR><TD>IP:</TD><TD>No hostname defined for IP address (192.168.1.203)</TD></TR> <TR><TD>Max Speed:</TD> <TD>1250.0 KBytes/s (ethernetCsmacd)</TD></TR> </TABLE> #--------------------------------------------------------------- Target[3comTC.ram]: 1.3.6.1.4.1.429.4.3.1.3.0&1.3.6.1.4.1.429.4.3.1.3.0:comm@192.168.1.203 MaxBytes[3comTC.ram]: 100000 AbsMax[3comTC.ram]: 262144 Title[3comTC.ram]: totconabi1 Free memory on HiPerARC PageTop[3comTC.ram]: <h1>totconabi1 Free memory on HiPerARC</h1> Options[3comTC.ram]: gauge YLegend[3comTC.ram]: Kbytes free ShortLegend[3comTC.ram]: Kbytes free LegendI[3comTC.ram]: sys-mem: LegendO[3comTC.ram]: real-mem: #--------------------------------------------------------------- Target[3comTC.heat]: 1.3.6.1.4.1.429.1.2.2.5.0&1.3.6.1.4.1.429.1.2.2.5.0:comm@192.168.1.202 MaxBytes[3comTC.heat]: 100 Title[3comTC.heat]: totconabi1 Temperature PageTop[3comTC.heat]: <h1>totconabi1 Temperature</h1> Options[3comTC.heat]: gauge YLegend[3comTC.heat]: Degrees C ShortLegend[3comTC.heat]: Degrees C #--------------------------------------------------------------- -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115