I;ve had this happen a few times. Just reboot the NMC card by sliding it out if the chassis or via the console interface and it will be well again (until next time). Rebooting the NMC won't affect active users sessions. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. | System Management Associates, Inc. 800-827-6085 x202 | 847-291-1550 x202 847-753-6832 fax | 847-291-3866 fax www.fsi.net | www.sysman-inc.com mark@fsi.net | levy@sysman-inc.com ---------------------------------------------------------------------
-----Original Message----- From: Jeff Mcadams [mailto:jeffm@iglou.com] Sent: Friday, June 08, 2001 9:51 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) NMC not responding
Also sprach Kirk Mitchell
My NMC recently stopped responding to SNMP queries, etc and I'm unable to access it via TCM. It has, however, not seemed to affect anything as far as dial-up, routing, etc. Other than the fact that I can't run MRTG against it or the badmodems.pl script, there's no indication that it's having problems.
Not surprising. The NMC does not have anything to do with the routine actions of taking and handling calls...it is what it says it is...purely a management card. You can totally remove the NMC and not lose any of the actual *production* functionality of the chassis.
Has the card gone bad...need replaced, lost something in part of config? How do I go about finding/fixing the problem?
Proly just needs a reboot, or possibly a reconfig...I've had a few lose some of the config (including IP addresses and stuff), and a reconfig from console (takes me about 30 seconds these days) gets them fully back up and running (sucks if its a remote city though). -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.