We see a pair of ports go down about once every week or two in a 16 PRI Group. I am not sure what code revisions are affected by this problem, but all of the newer ones are susceptible. When it strikes early in a hunt group and you are in a first available hunt sequence, it can be quite devastating. :( -Jim "Jason A. Nunnelley" wrote:
I am curious. I am not seeing this problem in my network. Is this a common problem, or isolated to certain cards?
Jason
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jim Johnson Sent: Tuesday, October 12, 1999 7:18 AM To: usr-tc Mailing List Subject: (usr-tc) 2.0.60 HDM Code
Is anyone using HDM 2.0.60.0 code. It is an Engineering Release which implements a DSP reset whenever the DSP goes idle on both ports. It is a temporary fix to the hanging pair of modems problem, but I just wanted some feedback, if any was available, before we put it on any of our production modems.
Thanks,
Jim
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.