channel/slot mappings, check them. ds0 service states, check those. Go into session monitor, and look at ds0 statistics, it may also show something. On Thu, 27 Jan 2000, Scot Desort wrote:
We added another PRI to our hunt group today. Telco says all trunks in group are set to UCD hunt method.
New PRI is only taking 1 call on channel 1. It has taken both analog and digital calls on that channel. I have checked the card in TCM and all channels are enabled. I have done a hardware reset on the card, with no effect. Have not had the opporunity to switch the PRI to see if the problem follows the card or the trunk.
Any ideas on what I might be missing?
-- Scot
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.