I am using a U.S. Robotics Total Control with NETServer Card V.34/ISDN with Frame Relay V3.3.28. For authentication, I use a RADIUS server, Livingston RADIUS 2.1 1999/6/23. On my Total Control, I have the following filter: ct1> show filter filter1 - IP rules - 1 permit 0.0.0.0/0 192.150.81.179/32 tcp 2 permit 192.150.81.179/32 0.0.0.0/0 tcp 3 deny 0.0.0.0/0 0.0.0.0/0 ip I have the following entry in the users file: perks4u Password="xxx" Framed-Protocol = PPP, Framed-Filter-Id = "filter1", Framed-Netmask = 255.255.255.255 User-Service-Type = Framed-User When I try to dial in as this user, I get connected, then immediately disconnected. The following appears in the syslog: Aug 23 13:15:05 ct1 acct 02000160 dialnet: port S9 perks4u succeeded dest 206.43.246.26 Aug 23 13:15:06 ct1 remote_connect: Packet filter does not exist. User perks4u disconnected. If anyone can shed some light as to why the NAS is claiming that the filter doesn't exist when it clearly does, that would be appreciated. _.,+=~`^"-.,_.,+=~`^"-*.,_.,+=~'`^"-.,_.,+=~`^"-.,_.,+=~`^"- Jesse Schachter .,. Systems Administrator The Protosource Network .,. Main Number: (888) 643-8558 <JSchachter@PSNW.COM> .,. Fax: (559) 490-8630 _.,+=~`^"-.,_.,+=~`^"-.,_.,+=~`^"-.,_.,+*=~`^"-.,_.,+=%~`^"- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.